Відео

Is it possible the coil will test okay from a cold coil but not okay from a hot coil? I refer to a pressure washer that starts on the first pull but wii not restart after running for ten minutes and shut down.I Does heat from the engine affect the coil?

Liked & subscribed! An excellent how to presentation on a common, frustrating problem with 2 cycle outdoor power equipment. Thanks for sharing your knowledge & experience.

Thanks for all the tips asome videos has helped me a lot.

Where do you buy your parts for Echo? Having hard time finding grommets lines tubes for my back pack blower model PB-265LN? Thx Markus

I APRESHEATEDAWORKUPUTIN🐇👊

NICE WORK ARE

Hi. Thank you for such a wonderful video. Here I am 4 years after you made this video because none of my local stores are able to fix my broken storm window screen frame that has mesh on it and no glass. My aluminum screen frame does not have any indentations on it and i have a corner key that is broken and stuck in 2 of the corners. This frame broke when someone got it out of its window track for replacing the mesh. Now we are trying to figure out how to fix this broken frame with corner keys stuck to 2 of its corners before we can even re mesh it. Should i try to push the latch out to get the corner key out? I wish i had someone to advise me but hoping you can see this-- would be great if i could have uploaded a pic here and gotten your advice- :)

Wayyy too much sodium hypochlorite. One pound of it treats 10,000 gallons. Well pump RIP.

I wish I kept my 20 yrs old Toro Super Recycler. My 2 year old Toro Recycler is a PIA.

Okay, how about if you want to drive? What are the sequence to start? Thank you

One last torque screw is so tight i cant remove if

Do you think it will also be actuator if none of the doors work and fuse keeps blowing?

Gracias me amigo...

what is mine doesn't move at all?

Thank you for taking the time to make this great informative and “micro” explanatory video. It looks like my issue is with the wiring and I was wondering if I could make a direct connection from the lead positive of the regulator and the battery (which made the battery begin charging) and keep it like this instead of digging in the wire harness to figure out where the problem is.

Can you save the old heating element and use any of those heating element springs to repair your new one if one was to break down the road ?

I agree you kept it simple the best repair video I've ever seen

Hello, Thanks for making these videos for this washer. I will try the fixes you mentioned for the washer not draining issue. Also I noticed that you are doing the fix on the same machines and some part of these videos are also same. Is it you showing all the issues on one machine? or the same machine all these issue over the years? Thank you!

I have never seen the main power feed come from the bottom of the box with the main breaker and the hot leads on the bottom. ?

I pay people to do this.

I have a 8 year Old Maytag Commercial top load washing machine. Vibrates real bad on medium loads. Was going to replace the suspension springs. Do you think it is worth fixing ? Thanks

My 16 year old Craftsman (poulan) trimmer has two different size fuel lines and fittings, so they can't be put on wrong. The smaller line is the fuel supply. I thought they were all that way. Tank vent is in fuel cap. This year, it is acting up. Maybe I didn't get all the fuel out last year. Carb adjustments work, even trimming grass under load.. It later acts up, stalling and hard starting. Stalling even with choke, as if out of gas. Bulb pumps but air is in return line along with fuel. Forget if it always did this. Fuel lines look good. Acted up with no fuel filter and cap loose. I took the carb apart and no visible dirt or deposits found. I put the top carb section on wrong and punctured the fuel pump diaphram with a screw, so I don't know if cleaning helped. I ordered a new carb as it may be something else inside carb. It has not arrived yet.

Thanks man, had the same problem whit my dads new trimmer and could not work it out. Seems he switcht the hoses around when he try to fix a fuel leak. Blast, disasembled the hole machien and cleand it but stil didn't work. Was breaking my head on it but never tought about those darn hoses!

Can you use steramine to disinfect water for drinking?

Thank you so much!! ....u saved me from thinking about getting another right now lol

excellent videos and audios of your repairs, you should be an instructor at a school , I like a challenge that people think is a waist of time repairing a good tool that needs some repair, unfortunately i wish i was able to repair a broken heart or a broken marriage and or relationship with the same success !! merci, gracias, thank you please have a nice safe day wearing your safety glasses and ear muffs, je t'aime ma cherie, je mennuie toujours, drive safe and buckle up so you can cut more grass

how to scrap the carbuereta cover

My mercedez 2020 doesn't have hand break.

Thank you. Life saver

Great trick! Did you use regular white vinegar (cooking strength) or the 30% white vinegar? Can you do a video on how to get hard water spots off of sink fixtures? My drain plugs in my sinks are all messed up from having mineral deposits on them--this happened before I got a water softerner.

Thank you for the thorough tutorial on cleaning and lubricating the garage door! I never knew you could use WD 40 to clean the gunk off the metal.

My Kenmore 500 series will drain but not spin at the end of the cycle but instead acts like it's trying to agitate instead but stops and says complete and of course the clothes are still wet...you can run it through its calibration cycle and it spins fine...im stumped and its only 6 years old.

EVERYYYYYYYYYY SINGLE BATTERY CHARGER IVE EVER SEEN OUTSIDE OF A STORE IS IN THE EXACT SAME COSMETIC CONDITION.BUT THEY WORK!!!🤣🤣🤣🤣🤣🤣🤣🤣

just watched another video about how to properly clean your push mower and it said to NEVER clean with a pressure washer lol gotta love all the professional know it alls on youtude.

You got there in the end, nice one. 🛠🛠

Thanks for this - great instructional video. I'm going to try this - perhaps I have more than one issue - tries to start like this goes sometimes but not others - will run in reverse very slowly - perhaps something with the forward / reverse switch. Thanks again.

The reason you couldn’t blow through the Carburetor initially was because the needle valve was seated, when you removed needle valve all of a sudden free flow of air! Nothing to do with your “cleaning efforts “

Be careful buying aftermarket tank vents, they look just like the Echo tank vents but they don't have the duck bill valve.😮

Some modern cars automatically engage the parking / emegency brake upon shifting to park. A parking pawl is not going to do nearly as good of a job of holding the car as the brake is.

When checking the voltage regulatory where do you put the neg.

Excellent video. Worked like a charm. Thank you!!!

Exact problem after getting it back from a full service. Never happened before taking it in. Maybe they fouled the carb? Will try out cleaning tomorrow.

thank you for the educational information. i am getting ready to do my well and i am a bit nervous. this is so helpful !

Easy as pie thanx

Can you use gorilla glue

Isn’t that the same battery that gives up the ghost?

You don’t see that very often

No attachments? For the price you paid, you were cheated. LoL

This video was very easy to understand and very well done. I like that there wasn't any weird fancy editing or annoying music. Keep up the good work. i hope this video resolves my issue.

what is the capacity of that washer